Bottles/Cages

Designed and engineered specifically for the Vuka BTA mount, the Zipp Vuka Carbon BTA bottle cage is constructed completely from UD carbon fiber, for low weight and strength, as well as super secure bottle fitment. It's engineered to virtually eliminate bottle launch.

Complete the look of your Super Record-equipped dream ride with Campagnolo's 18-gram Record Water Bottle Holder. This monocoque carbon marvel holds your bottle in the ideal position for quick and easy entry/exit. It's sleek, it's dreamy, it's 100% Campy.

The Rib Cage II is not only a sleek, lightweight water bottle cage, but it's also been designed to be fast in the wind. Of course, it also performs its primary task of holding tight to bottles dutifully, so you won't be losing bottles when the road gets rough. - SWAT-compatible design allows for storage and tool integration. - Super-low bottle position improves the aerodynamic profile. - Tuned compression design provides a secure bottle retention with easy in-and-out accessibility. - Reinforced composite material improves durability without adding weight. - Sleek, minimalist design with razor-sharp graphics. - Accepts EMT Cage Mount MTB or Road Tool. - Accepts MTB XC Box (when used on compatible frames). - Weight: 33g

The Polar Bottle Sport is the original insulated water bottle that keeps your water cold more than twice as long. Lightweight, squeezable and easy to clean, the Polar Bottle Sport is the go-to bottle for adventurers around the globe. This bottle comes standard with the Polar Bottle Sport cap.

Polar's Insulated Bottles keep liquids cooler, longer so you enjoy crisp, refreshing drinks even at the end of your rides. These excellent bottles are BPA- and chemical-free so every sip tastes great. Plus, they feature an easy-to-clean removable valve, plus a handy and removable carrying loop. This bottle comes standard with the Polar Bottle Sport cap.

The Polar Bottle Sport is the original insulated water bottle that keeps your water cold more than twice as long. Lightweight, squeezable and easy to clean, the Polar Bottle Sport is the go-to bottle for adventurers around the globe. This bottle comes standard with the Polar Bottle Sport cap.

Polar's Insulated Bottles keep liquids cooler, longer so you enjoy crisp, refreshing drinks even at the end of your rides. These excellent bottles are BPA- and chemical-free so every sip tastes great. Plus, they feature an easy-to-clean removable valve, plus a handy and removable carrying loop.

The Polar Bottle Sport is the original insulated water bottle that keeps your water cold more than twice as long. Lightweight, squeezable and easy to clean, the Polar Bottle Sport is the go-to bottle for adventurers around the globe. This bottle comes standard with the Polar Bottle Sport cap.

Polar's Insulated Bottles keep liquids cooler, longer so you enjoy crisp, refreshing drinks even at the end of your rides. These excellent bottles are BPA- and chemical-free so every sip tastes great. Plus, they feature an easy-to-clean removable valve, plus a handy and removable carrying loop.

The Happy Can from BiKASE is a convenient handlebar/stem mounted drink holder or general purpose stash sack. Using a few hook and loop straps, the Happy Can mounts between your handlebar and stem so you have easy access to your beverage or other items. - easily connects to handlebars and stem using 2 Velcro straps - securely fits cycling water bottle or other bottle sizes - perfect to use as a small storage bag for snacks or phone - mesh side pocket - rain fly with draw string to secure water bottle on bumpy rides

With its lightweight insulation, the Camelbak Podium Ice 21-fluid-ounce bike bottle keeps your drinking water ice-cold even during rides in hot weather.

Keep your water cold 4x longer! We re-engineered our legendary Podium Ice to be the ultimate insulated cycling bottle, even when temps rise into triple-digits. With unmatched aerogel insulation technology, high flow rate, and easy cleanability, the Podium Ice stands second to none. And like our entire Podium collection, it's 100% free of BPA, BPS and BPF and features improved cage fit and the squeezability that CamelBak is known for. - Aerogel Insulation: Keeps water cold 4x longer than other bottles - Optimized Cage Fit: Engineered to securely fit in a variety of bottle cages - Easy Squeeze: Get more fluid with less effort - High Flow, Self-Sealing Cap: Maximizes flow rate while eliminating splatters and spills - 100% free of BPA, BPS and BPF: Ride clean, drink clean - Easy-to-Clean Interface: All parts can separate for thorough cleaning - Positive Lock out: For leak-proof transport - Trutaste Polypropylene with Hydroguard: Taste your water and nothing else, time after time.

Made of a lightweight nylon composite, Serfas’ Starfighter Nylon Cage works with road and mountain bikes to hold your bottle in place and allow for easy removal.

Planet Bike's PB Cage holds your bottle securely with sturdy 6.2mm-diameter 6061-aluminum tubing and comes in a variety of colors so you can coordinate your bike down to the last detail.

The unique design of Serfas’ Switch-Hitter Nylon Cage makes it adjustable for center, right or left side bottle retrieval. On any bike frame where bottle clearance is an issue, this lightweight nylon cage shines.

- Constructed using a 6mm aluminum rod - Embossed MSW logo

MSW's PC-100 Wide-Range Water Bottle Cage fits a variety of bottle sizes, ranging from 64-74mm in diameter. It's made from a rugged reinforced Nylon composite so you can count on strength and toughness. And, its super-light design means you won't even notice it's there.

• Holds bottles securely • Buttons make bottle entry & exit easy • Fits standard 20–24oz water bottles

The Kinetic Twenty20 Bottle Cage ergonomically improves the simple act of grabbing a drink on the bike. A natural arm motion removes and replaces a bottle at an angle of approximately 20 degrees off-center. The Twenty20 Bottle Cage can be mounted on a bike frame at a 20-degree offset left or right, allowing bottle insertion into the center of the cage, rather than in from the side.

MSW's Up or Down height-adjustable bottle cage allows for customizable bottle positions. Great for small or irregularly shaped frames, full-suspension bikes, and to make room for frame bags. - Five height positions for 30mm total range - Easy to slide bottles in and out - Durable nylon composite

Lezyne's Power Cage is made from hollow aluminum for strength and reliability. And, its wraparound design holds your bottles securely over the rough stuff and allows for easy in/out.

Lezyne's Alloy Cage is CNC-machined out of aluminum for impressive strength and durability. Its unique rib design holds bottles securely over rough roads and allows for easy in/out, plus the integrated pump mounts holds a Road Drive pump securely.

- Self-adjusting elastomer to improve bottle retention - Made with high-impact composite material

XLAB's Chimp Carbon Cage weighs only 36 grams and firmly holds your bottles in place, even over bumpy terrain thanks to 5 pounds of gripping force. It's specifically designed for use with tri bikes and other aero rigs with smaller front triangles that make grabbing bottles from ordinary cages difficult. The Chimp Cage's 30-degree cutoff lets you pull your bottles out at an angle for improved ease of use. Plus, this light carbon cage grips great and has supportive top and bottom tabs so you'll never lose a bottle.

XLAB's Gorilla Carbon Cage is one of the most popular rear bottle cages on the market! It boasts an amazing 7-pound grip force to keep bottles in place on bumpy roads and it's been specifically tweaked to work perfectly with saddle-mounted cage carriers. The Gorilla has over two times the gripping force of conventional carbon cages thanks to its 6 carbon gripping fingers, its top and bottom retention tabs and thicker carbon construction. And, it's still easy to slide your bottle out and grab a drink even when you're pushing it to the limit.

XLAB's Torpedo Carbon Cage is designed specifically for their horizontal aero bar hydration mounts. Use with a standard bottle or XLAB's new Torpedo model (mounts and cages sold separately). The cage is made of ultra-light carbon, holds bottles securely and is super easy to use. It features a 5-pound grip force on bottles so they stay put over even the roughest roads.

XLAB's Mezzo Cage Pod is a screw-top holder for your on-the-road tools and spares that fits in your bottle cage. It's convenient to move from bike to bike, it protects your gear, and it includes a fleece bag so the contents in the pod don't rattle and make noise inside. The pod is 750ml capacity to hold a spare tube, levers, CO2 inflator and multi-tool.

• AERODYNAMIC LOCATION - Mounts to saddle, hiding in body’s draft • HIGHLY ADJUSTABLE - Can adjust cage angle and cage height for a perfect custom position • STABLE DESIGN - Stiffest mount on market with alloy arms • FLARED CAGE DESIGN - Makes inserting bottle easy • HIGHEST GRIPPING CAGE - 14 lbs grip on bottle to prevent bottle launches • ANTI-VIBRATION - Locking hardware for safety and security • REPAIR STORAGE OPTIONS - Compatible with AERO POUCH 300 BAG or MULTI-STRIKE REPAIR HOLDER (each sold separately) • Aircraft aluminum mount • Carbon fiber bottle cage • Weight: 141.5 grams Why single rear carriers? • Replaces frame bottle: Standard frame-mounted bottles have high aerodynamic drag, so place your bottle at the rear instead. The DELTAs are mounted on the saddle rails for no measurable drag. • Refills front drink system: Use the DELTAs to refill a front drink system. Just bring the spare bottle forward from the DELTA and refill. If you have the popular XLAB TORPEDO aerobar mounted system (sold separately), then simply replace the empty front bottle with the spare bottle from the DELTA. • Adds an extra bottle: These systems are also ideal for longer training rides or century rides, where an extra bottle is necessary so you can have your favorite mix with you at all times.

Carbon BTA hydration mount compatible with Torpedo Versa (sold separately). 16-layer carbon fiber plate ensures a no-rattle, no-bounce ride. Pre-drilled front mounting holes for Torpedo Versa or aero computer mounts. - Adjustment Width: 75-150mm - Construction (Plate): 16-layer unidirectional carbon fiber - Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip - Weight: 1.9oz (55g)

MSW PC-120 composite water bottle cages are a great value and fit standard mounting positions. The lightweight plastic is durable, and easily secures your bottle. - Lightweight, composite construction - Does not include mounting bolts - Embossed MSW logo