- SKS B65 Commuter II Fender Set for 28 - Famous Bluemel Full-Coverage Fender Set - Features stainless hardware and stainless 3.0mm stays - Front profile 680mm - Rear profile 1185mm - ASR security release system for the front wheel
Stay clean and dry with SKS's Commuter II fenders! The stainless-steel hardware comes pre-installed for quick and easy mounting.
Accessorize your ride. Keep yourself dry. Functional. Fashionable. Fenders. No one wants that wet stripe on their back. Keep yourself and your gear clean and dry with a stylish fender. - Front and rear full-length fenders designed for use on Townie Go! e-bikes - Fits both step-thru and step-over Townie Go! models - Compatible with 26" x 2.35" balloon tires - Will not fit other Townie bike models - Protects against pesky mud and splashes
Turn your bike into an all-weather vehicle with SKS's Beavertail Fender Set! The robust steel brackets provide safe and easy mounting, and the front fender works with most suspension forks.
Keep the road grime and water off your clothes with a durable fender set made specifically for the Roll. No-fuss installation means you can add them quickly and easily, so you're always ready to ride. - Valuable and durable plastic fender set for Roll. - Designed for 650b x 2.3" tires. - Stainless steel fender stays and hardware. - Rear fender supports Plug and Play frame mounting. - Front: 660mm / Rear: 1050mm
Just the thing for rainy weather, the Portland Design Works minimalist Origami Rear Seatpost Fender attaches to a clamp-on bracket you mount to your seatpost. And it packs down so you can easily store it when not in use. - Length: 445 mm (7.5") - Weight: 160 g (5.6 oz)
The X-Blade 27.5+/29-inch is a high-quality 2-component clip-on fender for the rear wheel of a 27.5+/29-inch mountain and trekking bikes. Due to the quick-release mounting, the fender can be fitted to almost any seat post and optimally adjusted to the wheel using the 2-joint technology. - High performance dual compound plastic - Easy quick-release-fastening by pre-adjusted powerstrap - 2 joints for optimized adjustment to all frames - Optimized dirt protection - 27.5+ and 29-inch wheel compatible
SKS's S-Blade rear fender attaches easily to almost any road bike seatpost, protecting you from road spray and letting you ride through the wet.
Accessorize your ride while keeping yourself dry at the same time. - Front and rear full length fenders designed for use on Townie 26" bicycles ONLY - Fits both men's and ladies' 26" Townie models - Protects against splashes - WILL NOT FIT Tall Townie Mens Bicycles or 24" Townie bicycles
A pair of Electra's Townie Aluminum Fenders on your ride will let you pedal even in less-than-ideal conditions. They're made from durable, low-maintenance aluminum and offer full coverage so you'll arrive squeaky clean. All mounting hardware is included for quick and easy installation.
Functional. Fashionable. Fenders. Keep you and your threads clean and dry by adding stylish fenders. - Front and rear full-length fenders designed for use on Townie Path bicycles - Fits both Step-Thru and Step-Over Townie Path models - Compatible with tires up to 2.35-inch wide - Protects against pesky mud and splashes
Accessorize your ride while keeping yourself dry at the same time. - Front and rear full length fenders designed for use on Regular size Cruiser Men's 26" bicycles ONLY - Fits most Electra Cruiser Mens models with Flat Foot Technology (2006 & newer) - Protects against splashes - WILL NOT FIT Tall Cruiser 26" Bicycles
Topeak's DeFender M1 front fender offers durable rain and mud protection on wet and sloppy rides for your 27.5- or 29-inch wheeled bike. It's incredibly light and easy-to-use, too. The M1 installs easily to any standard fork, even reverse arch designs and seamlessly integrates with the front end of your bike. The quick-release attachments allow the DeFender to be installed and removed in seconds.
Planet Bike's Bog Suspension Fork Front Fender keeps rain and mud at bay while you play. It's made of a super-durable, all-weather polymer and mounts easily to most suspension forks. And, with the wide profile, you've got extra coverage.
Turn your bike into an all-weather vehicle with Planet Bike's Hardcore Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. They boast mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.
The DRY-TECH fender set is an engineered fender set with extended, research-based length for superior water protection. The fenders are made of a lightweight, yet highly durable multi-material design. It's also been engineered in Specialized's very own Win Tunnel in order to improve protection and to minimize water spray. The fenders are available in three different sizes (35, 45, and 52mm), and they're designed to work on bikes with 700C wheels—with or without Specialized Plug + Play frame mounting. Lastly, for a finishing touch, the fenders include heat-treated, lightweight aluminum fender stays with stainless steel hardware. - Engineered fender set with extended, research-based length for superior water protection. - Lightweight, yet highly durable multi-material design. - Engineered in Specialized's Win Tunnel to improve protection and minimize water spra.y - Designed to work on bikes with 700C wheels and with or without Specialized Plug + Play frame mounting. - Heat-treated, lightweight aluminum fender stays with stainless steel hardware.
Topeak's DeFender RX rear fender offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The quick-release seatpost attachment allows the DeFender to be installed and removed in seconds.
Topeak's DeFender M2 rear fender offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The quick-release attachment fits most seatposts and allows the DeFender to be installed and removed in seconds. Plus, the 2-pivot arm is super adjustable for better coverage and a perfect fit on any bike.
$10.89 - $15.08
- Attaches to saddle rails - Quick and easy to install and remove - Fat Butt, a wider version for fatbike applications - Road/CX narrower for road and cross bike applications
- Rugged 6061 aluminum construction is corrosion resistant - 100mm mudflaps provide ultimate coverage and are double-riveted for durability - Hardware is all stainless-steel and pre-installed for hassle-free mounting - V-stays for added stability - Disc brake compatible - 50mm width - Release Tabs on front fender for added safety - Meets EN test standards
$39.99 - $44.99
If you ride bent, Planet Bike's recumbent fenders keep you covered when Mother Nature rains on your ride. They are designed for non-tradtional bike and trike setups. Their clean lines and rugged aluminum construction provide great protection from rain, road grit, and other tire spray. - 6061 aluminum blades - 150mm mudflaps for extra coverage - Adjustable stainless steel stays create a secure fit on any style recumbent - Eyelets Required?: Yes - Release Tabs on front fender for added safety - Wheel size: 26” - Max tire size: 26" x 1.5"(50mm) / 26" x 1.9"(60mm)
- Color: Black - Maximum Tire Width: 35 mm - Fender Width: 45 mm - Wheel Size: 700c - Material: Aluminum - Requires Eyelets?: Yes
$14.99 - $19.99
Optimized for RockShox forks, RockShox MTB Fenders deliver exceptional protection for your fork, with deep side skirts to keep the mud and debris away from the most vital parts of your fork—and your body. Take your bike's customization to the next level with nine color offerings made to match RockShox decal packs—or go black-on-black for that minimalist look. MTB Fenders come complete with four beefy zip ties for installation so you can get to the trailhead sooner and shred with much less mess. - Works on all RockShox fork models - Comes with 4 zip ties for immediate installation - Offered in a wide range of colors that match RockShox's fork decal packs - Designed specifically for RockShox forks - Deep side skirts protect stanchions and dust seals from rocks and debris - Precisely placed mounting holes make the fender follow the wheel's contour, minimizing contact when the fork is compressed
Tacky trails and damp roads, they're what dreams are made of. That doesn't mean we want our faces plastered with the muck that comes along with them. Using nothing more than a handful of zip ties, WTB's minimalistic mud guard attaches to your fork in less than a minute to keep your vision free of mud and focused on the turn ahead.
End wet feet forever! SKS Longboard are one of the longest and best coverage fender on the planet. They feature stainless-steel hardware and SKS's security clips for durability and safety. - 700c x 28–37
Specifically designed for 27.5” and 29” wheeled MTB’s. The DeFender front and rear fenders are the perfect choice for lightweight durable mud protection on those wet and sloppy rides. Quick release allows DeFenders to be installed and removed in seconds. A highly polished underside helps prevent dirt buildup and aids in cleaning. Fits 27.5” – 29” MTB tires up to 3” wide. - QR fork attachment fits 19.6mm/26mm/27.7mm/35mm steerer tube - Two tone injected high impact resistant plastic - Weight: 233 grams - Rear angle adjustable - 73x21x11cm/28.7x8.3x4.3-inch
The Ass Savers foldable fender hides under your saddle till you need it, then when it rains, you just unfurl it and go. Or if you don't want to have it tucked under your seat, just let it ride in your backpack. It's flat, doesn't take up much space, and can really come in handy. - Dimensions: 340 X 100mm - Material: 100% recyclable polypropylene - Weight: 15g
Functional. Fashionable. Fenders. Keep you and your threads clean and dry by adding stylish fenders. Accessorize your ride and keep yourself dry. - Front and rear full-length fenders designed for use on Townie 26-inch bicycles - Fits both Step-Thru and Step-Over Townie Original models - Compatible with tires up to 2.0-inch wide - Protects against pesky mud and splashes
Keep water and mud at bay with SKS's Dashblade fender! It's light and easy to install and remove thanks to its quick-release strap that fits a wide variety of seatposts and seat tubes.
The ultimate clip-on mudguard set for road bikes for tire widths up to 25mm. Its smart, double-hinged quick release fitting system also fits aero forks and is also compatible with disc brakes, direct mount brakes, and thru axles. Mudguards can be perfectly adapted to the radius of the wheel by adjusting the length of the stays. The superlight extra long mud flaps give additional spray protection. In addition to using the quick release rubber straps it can also be fixed in place with zip ties. Paintwork protection film for the frame is also included. Disc brake compatible: Please be mindful of the brake wire.
Page 1 of 5 Next page